EasyManuals Logo

Cisco ASR 5500 System Administration Guide

Cisco ASR 5500
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #322 background imageLoading...
Page #322 background image
Initiating an SRP Switchover
An SRP switchover places the primary chassis in standby mode and makes the backup chassis active. The
secondary chassis is now processing sessions with the upgraded software.
Step 1
On the primary chassis run the srp initiate-switchover command. All existing sessions will be migrated to the backup
chassis and it begins servicing new session requests. Allow the switchover process to complete.
Step 2
On the primary chassis, run the show srp info command. Chassis State should indicate Standby when switchover is
complete.
Step 3
On the backup chassis, confirm the switchover is complete by running the show srp info command. Chassis State should
indicate Active when switchover is complete.
Checking AAA Monitor Status on the Newly Active System
If your network deployment requires communication with AAA servers, log into the newly active system and
perform an AAA monitor check. You will be checking for the existence of any SNMP traps that indicate the
system cannot communicate with AAA servers (starSRPAAAUnreachable).
Step 1
Run the Exec mode command show snmp trap history |grep starSRPAAAUnreachable.
Step 2
There should be no output for this command, or no very recent SNMP trap notifications (based on the event timestamp).
Step 3
If the active system cannot communicate with one or more AAA servers, refer to AAA Monitor for additional information.
Completing the Software Update
Log into the backup (standby) system and repeat the following tasks to complete the upgrade process on the
backup (standby) system:
•
Updating the Boot Record, on page 294
•
Reboot StarOS, on page 294
•
Updating the Configuration File, on page 294
•
Verifying the Software Version, on page 295
•
Saving the Configuration File, on page 295
•
Synchronizing File Systems, on page 294
•
Performing Health Checks, on page 293
•
Performing SRP Checks, on page 293
•
Performing BGP Checks, on page 293
ASR 5500 System Administration Guide, StarOS Release 21.5
296
Interchassis Session Recovery
Primary System

Table of Contents

Other manuals for Cisco ASR 5500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 5500 and is the answer not in the manual?

Cisco ASR 5500 Specifications

General IconGeneral
BrandCisco
ModelASR 5500
CategoryNetwork Router
LanguageEnglish

Related product manuals