Cisco ASR 5500 - ASR 5500 SDR CLI Command Strings

APPENDIX E
ASR 5500 SDR CLI Command Strings
•
ASR 5500 SDR CLI Command Strings, page 389
ASR 5500 SDR CLI Command Strings
This appendix identifies the CLI command strings that can be entered for a record section via the support
record section command in the Global Configuration Mode. The string must be entered within double quotation
marks (" ") to be recognized. The table below also indicates default and non-default strings.
For detailed command string information, refer to the Command Line Interface Reference or the online Help
for the command.
The table below also indicates default and non-default strings. It reflects the output sequence of the show
support collection definitions command.
Table 29: ASR 5500 SDR CLI Command Strings
Command StringDefault SDRNo.
"show version verbose"Enabled0
"show clock"Enabled1
"show clock universal"Enabled2
"show configuration"Enabled3
"show_profile"Enabled4
"show context"Enabled5
"show boot"Enabled6
"show boot initial-config"Enabled7
"show system uptime"Enabled8
"show license information"Disabled9
"show license history"Disabled10
ASR 5500 System Administration Guide, StarOS Release 21.5
389