Cisco ASR 9000 Series - Page 109

Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
How to Configure ANCP on Cisco ASR 9000 Series Routers
QC-95
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
OL-23108-02
Prerequisites
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs for ANCP.
SUMMARY STEPS
1. configure
2. ancp
3. end
or
commit
4. show ancp summary [statistics] [detail]
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RSP0/CPU0:router#
configure
RP/0/RSP0/CPU0:router(config)#
Enters global configuration mode.
Step 2
ancp
Example:
RP/0/RSP0/CPU0:router(config)#
ancp
Enables ANCP.