EasyManuals Logo
Home>Cisco>Network Router>ASR 9000 Series

Cisco ASR 9000 Series Service Configuration Guide

Cisco ASR 9000 Series
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #122 background imageLoading...
Page #122 background image
Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
Configuration Examples for Configuring ANCP on Cisco ASR 9000 Series Routers
QC-108
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
OL-23108-02
Mapping AN ports to VLAN Subinterfaces: Example
The following example shows a unique access node ID being defined:
configure
ancp an-port circuit-id circuit1 interface gigabitethernet 2/0/1/1.1
The following example shows how to display information for a port identified by its subinterface:
show ancp an-port interface gigabitethernet 0/0/0/37.1
AN port circuit-id ccc1:
State UP
UPtime 02:23:45
Time Since Last Message 00:00:00
Encap Type ETHERNET
DSL type ADSL1
DSL Line State SHOWTIME
Number of Mapped Interfaces 3
Neighbor sender-name 0006.2aaa.281b
Neighbor description 7200-client
Configured Rate Adjustment 90%
Actual Downstream Data Rate (kbps) 2500
Effective Downstream Data Rate (kbps) 2250
The following example shows how use the detail keyword to display port information as well as a list
of the interfaces mapped to that port.
show ancp an-port circuit-id ccc1 detail
AN port circuit-id ccc1:
State UP
UPtime 02:31:36
Time Since Last Message 00:00:00
Encap Type ETHERNET
DSL type ADSL1
DSL Line State SHOWTIME
Number of Mapped Interfaces 3
Neighbor sender-name 0006.2aaa.281b
Neighbor description 7200-client
Configured Rate Adjustment 90%
Actual Downstream Data Rate (kbps) 2500
Effective Downstream Data Rate (kbps) 2250
Actual Data Rate Upstream/Downstream (kbps) 2500/2500
Minimum Data Rate Upstream/Downstream (kbps) 0/0
Attainable Data Rate Upstream/Downstream (kbps) 0/0
Maximum Data Rate Upstream/Downstream (kbps) 0/0
Minimum Low Power Data Rate Upstream/Downstream (kbps) 0/0
Maximum Interleaving delay Upstream/Downstream (ms) 0/0
Actual Interleaving Delay Upstream/Downstream (ms) 0/0
Sub-interface Summary: total 3
-----------------------------------------------
Sub-interface Name ifhandle
--------------------------------- ----------
GigabitEthernet0/0/0/37.1 0x0
GigabitEthernet0/0/0/37.11 0x0
GigabitEthernet0/0/0/38.10 0xb80

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
BrandCisco
ModelASR 9000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals