Cisco ASR 9000 Series Service Configuration Guide

Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
How to Configure ANCP on Cisco ASR 9000 Series Routers
QC-99
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
OL-23108-02
Step 4
end
or
commit
Example:
RP/0/RSP0/CPU0:router(config-ancp)# end
or
RP/0/RSP0/CPU0:router(config-ancp)# commit
Saves configuration changes.
• When you issue the end command, the system
prompts you to commit changes:
Uncommitted changes found, commit them
before exiting (yes/no/cancel)?
[cancel]:
– Entering yes saves configuration changes
to the running configuration file, exits the
configuration session, and returns the
router to EXEC mode.
– Entering no exits the configuration
session and returns the router to EXEC
mode without committing the
configuration changes.
– Entering cancel leaves the router in the
current configuration session without
exiting or committing the configuration
changes.
• Use the commit command to save the
configuration changes to the running
configuration file and remain within the
configuration session.
Step 5
show ancp neighbor {description
description-string | sender-name { H.H.H |
A.B.C.D }} [statistics][detail]
Example:
RP/0/RSP0/CPU0:router# show ancp neighbor
sender-name 0006.2aaa.281b
(Optional) Displays data or message statistics
associated with individual ANCP adjacencies or
sets of adjacencies.
Step 6
show ancp neighbor summary
[statistics][detail]
Example:
RP/0/RSP0/CPU0:router# show ancp neighbor
summary
(Optional) Displays adjacency counts by state.
Step 7
clear ancp neighbor {all | description
description-string | sender-name { H.H.H |
A.B.C.D }}[state | statistics]
Example:
RP/0/RSP0/CPU0:router# clear ancp neighbor
all
(Optional) Clears ANCP neighbors, either all or
individually. Configured ports are placed in a
down state while releasing unconfigured ports. If
state is selected, the adjacency is reset without
clearing the TCP socket.
Step 8
clear ancp summary [statistics | detail]
Example:
RP/0/RSP0/CPU0:router# clear ancp summary
statistics
(Optional) Clears aggregate message statistics
only, without modifying individual neighbor or
port statistics.
Command or Action Purpose

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model