Cisco ASR 9000 Series Service Configuration Guide

Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
Configuration Examples for Configuring ANCP on Cisco ASR 9000 Series Routers
QC-106
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
OL-23108-02
List of AN port data for neighbor sender name 0006.2aaa.281b
------------------------------ ----- ---------- -------- ---- ------------
Line Num Adjusted DS
Circuit-id State Uptime State Intf Rate (kbps)
------------------------------ ----- ---------- -------- ---- ------------
circuit1 UP 00:27:49 SHOWTIME 3 2250
circuit2 UP 00:00:49 SHOWTIME 2 2250
circuit3 UP 00:00:49 SHOWTIME 2 2250
circuit4 UP 00:00:49 SHOWTIME 0 2250
The following example shows the same command, this time with the addition of the statistics keyword,
showing a summary of message statistics for the selected neighbor:
show ancp neighbor sender-name 0006.2aaa.281b statistics
ANCP Neighbor Message Statistics
for Sender-name -, Description 0006.2aaa.281b
-----------------------------------------------
Sent Received
SYN 1 2
SNYACK 1 0
ACK 589 238
RSTACK 0 0
Port Up - 10
Port Down - 0
Drops 0 0
Total 600 250
The following example shows how to display generic information about ANCP configuration, along with
neighbor and port counts by state:
show ancp summary
ANCP Summary Information
----------------------------------------------
Capability: Topology Discovery
Server sender-name: 0013:1aff.c2bd
Neighbor count by state:
- 0
SYNSENT 0
SUNRCVD 0
ESTAB 1
----------------------------------
Total 1
Port count by state:
State Up 1
State Down 0
State Unknown 0
----------------------------------
Total 1
No. configured ports 1
No. mapped sub-interfaces 4
The following example shows how to display rate adjustment configuration information in addition to
the generic information shown in the previous example:
show ancp summary detail
ANCP Summary Information
----------------------------------------------
Capability: Topology Discovery

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model