Cisco ASR 9000 Series Service Configuration Guide

Configuring Modular QoS Service Packet Classification and Marking on Cisco ASR 9000 Series Routers
Configuration Examples for Configuring Modular QoS Packet Classification and Marking on Cisco ASR 9000 Series
QC-39
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
OL-23108-02
Output from the show policy-map targets command indicates that the Gigabit Ethernet interface 0/1/0/0
has one policy map attached as a main policy (as opposed to being attached to a child policy in a
hierarchical QoS configuration). Outgoing traffic on this interface is affected if the policy is modified:
show policy-map targets
Fri Jul 16 16:38:24.789 DST
1) Policymap: policy1 Type: qos
Targets (applied as main policy):
GigabitEthernet0/1/0/0 output
Total targets: 1
Targets (applied as child policy):
Total targets: 0

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model