Cisco ASR 907 Installing

Figure 12: Cable Management Bracket (A907-CAB-BRACKET)
Cable management guide1
Step 2 Secure the cable management brackets with four M4 screws. The recommended maximum torque is 10 in.-lb
(1.12 N-m).
Installing the Chassis Ground Connection
Before you connect the power or turn on the power to the Cisco ASR 907 Router, you must provide an adequate
chassis ground (earth) connection to your router.
This section describes how to ground the Cisco ASR 907 Router chassis. The router provides two locations
for attaching a 2-hole grounding lug according to the rack-mounting brackets you use to install the router.
Installing the Cisco ASR 907 Router
12
Installing the Cisco ASR 907 Router
Installing the Chassis Ground Connection

Cisco ASR 907 Specifications

General

Brand	Cisco
Model	ASR 907
Category	Network Router
Language	English