Cisco ASR 907 Installing

Figure 26: Installing the 1200 Watts AC Power Supply
Step 4 Tighten the captive installation screws of the power supply. The recommended maximum torque is 5.5 in.-lb
(.62 N-m).
Power supply captive installation screws must be tight to ensure protective grounding continuity.
Warning
Recommended Power Cables
We recommend the following power cables for Cisco ASR 907 routers:
Table 2: Power Cable PIDs for A900-PWR1200-A (1200 W)
DescriptionPID
US AC Power Cord for Cisco ASR 900, NEMA 5-20PWR-CAB-AC-USA520
Power Cord for AC V2 Power Module (USA), NEMA L6-20PPWR-CAB-AC-USA
Installing the Cisco ASR 907 Router
36
Installing the Cisco ASR 907 Router
Recommended Power Cables

Cisco ASR 907 Specifications

General

Brand	Cisco
Model	ASR 907
Category	Network Router
Language	English