Contents
v
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Setting the Signaling Image to H.323 Mode 4-2
Setting Up User IDs for the Cisco ATA 4-3
Using the Cisco ATA with an H.323 Gatekeeper 4-3
Choosing Cisco ATA Registration Mode with an H.323 Gatekeeper 4-3
Setting Up Gatekeeper Time-To-Live Value 4-4
Setting Up an Alternate H.323 Gatekeeper 4-4
Establishing Authentication with Cisco H.323 Gatekeeper 4-5
Using the Cisco ATA Without an H.323 Gatekeeper 4-6
Using the Cisco ATA With an H.323 Gateway but Without an H.323 Gatekeeper 4-6
Using Multiple Cisco ATAs Without an H.323 Gatekeeper 4-6
Setting the Audio Codecs 4-7
Additional H.323 Services 4-7
Configuring Audio Packet Settings 4-8
Configuring Billable Features 4-8
Configuring the Call Waiting Permanent Default Setting 4-9
Configuring the Cisco ATA Refresh Interval 4-9
Configuring Hook Flash Timing 4-9
Configuring the Mixing of Call Waiting Tone and Audio 4-9
Configuring Network Ringback Tone 4-9
Configuring On-hook delay 4-10
Configuring Reverse Audio Cut-Through Behavior 4-10
Configuring Supplementary Service Behavior and Parameters 4-10
Debugging Diagnostics 4-10
Hardware Information Display 4-10
Network Timing 4-11
Polarity Settings 4-11
Progress Tones 4-11
Selecting DTMF and Hookflash Transmission Methods 4-11
Selecting H.323 Connection and H.245 Transmission Methods 4-12
Setting Dial Plans 4-12
Complete Reference Table of all Cisco ATA H.323 Services 4-12
CHAPTER
5 Parameters and Defaults 5-1
Configuration Text File Template 5-2
User Interface (UI) Parameter 5-3
UIPassword 5-3
Configuration-Complete Parameter 5-4
ToConfig 5-4
Parameters for Configuration Method and Encryption 5-4
To Next Page
Loading...
Need help?
General
