Cisco Catalyst 250 Series Command Reference

Table 4: show lacp counters Field Descriptions
DescriptionField
The number of LACP packets sent and received by
a port.
LACPDUs Sent and Recv
The number of LACP marker packets sent and
received by a port.
Marker Sent and Recv
The number of LACP marker response packets sent
and received by a port.
Marker Response Sent and Recv
The number of unknown and illegal packets received
by LACP for a port.
LACPDUs Pkts and Err
This is an example of output from the show lacp internal command:
Switch> show lacp 1 internal
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Channel group 1
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi2/0/1 SA bndl 32768 0x3 0x3 0x4 0x3D
Gi2/0/2 SA bndl 32768 0x3 0x3 0x5 0x3D
The following table describes the fields in the display:
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
OL-29043 -01 59
Layer 2 Commands
show lacp

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English