Cisco Catalyst 250 Series Command Reference

show platform etherchannel
To display platform-dependent EtherChannel information, use the show platform etherchannel command
in privileged EXEC mode.
show platform etherchannel {data-structures| flags| time-stamps}
Syntax Description
Displays EtherChannel data structures.data-structures
Displays EtherChannel port flags.flags
Displays EtherChannel time stamps.time-stamps
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS 15.0(2)EX
Usage Guidelines
Use this command only when you are working directly with a technical support representative while
troubleshooting a problem. Do not use this command unless a technical support representative asks you to do
so.
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
OL-29043 -01 67
Layer 2 Commands
show platform etherchannel

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English