Cisco Catalyst 250 Series User Manual

DescriptionAttributeSub-Type NumberVendor-Specific
Company Code
Number
PPP password
authentication. The
vendor-specific attributes
(VSAs)
“preauth:send-name” and
“preauth:send-secret” will
be used as the PAP
username and PAP
password for outbound
authentication. For a
CHAP outbound case, both
“preauth:send-name” and
“preauth:send-secret” will
be used in the response
packet.
send-secret1926
Provides the name of the
remote host for use in
large-scale dial-out. Dialer
checks that the large-scale
dial-out remote name
matches the authenticated
name, to protect against
accidental user RADIUS
misconfiguration. (For
example, dialing a valid
phone number but
connecting to the wrong
device.)
remote-name1926
Miscellaneous Attributes
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 81
Configuring RADIUS
Vendor-Specific RADIUS Attributes

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English