DescriptionAttributeSub-Type NumberVendor-Specific
Company Code
Number
Specifies additional vendor
specific attribute (VSA)
information for NAS-Port
accounting. To specify
additional NAS-Port
information in the form an
Attribute-Value Pair
(AVPair) string, use the
radius-server vsa send
global configuration
command.
This VSA is
typically used in
Accounting, but
may also be used
in Authentication
(Access-Request)
packets.
Note
Cisco-NAS-Port2926
Sets the minimum number
of links for MLP.
min-links1926
Allows users to configure
the downloadable user
profiles (dynamic ACLs)
by using the authentication
proxy feature so that users
can have the configured
authorization to permit
traffic going through the
configured interfaces.
proxyacl#<n>1926
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
82 OL-29048-01
Configuring RADIUS
Vendor-Specific RADIUS Attributes
To Next Page
Loading...
Need help?
General