Cisco Catalyst 4500 Series Overview

Chapter 1 Module Overview and Specifications
Ethernet and Fast Ethernet Switching Modules
1-12
Catalyst 4500 Series Module Installation Guide
78-13267-06
Ethernet and Fast Ethernet Switching Modules
This section describes the Catalyst 4500 series Ethernet and Fast Ethernet
switching modules and includes the following sections:
• WS-X4124-RJ45, page 1-12
• WS-X4124-FX-MT, page 1-14
• WS-X4148-FX-MT, page 1-15
• WS-X4148-RJ, page 1-15
• WS-X4148-FE-BD-LC, page 1-16
• WS-X4148-FE-LX-MT, page 1-17
• WS-X4148-RJ21, page 1-18
• WS-X4148-RJ45V, page 1-18
• WS-X4248-FE-SFP, page 1-20
• WS-X4224-RJ45V, page 1-20
• WS-X4248-RJ21V, page 1-22
• WS-X4248-RJ45V, page 1-23
• WS-X4232-GB-RJ, page 1-24
• WS-X4232-L3, page 1-25
• WS-X4232-RJ-XX, page 1-27
– WS-U4504-FX-MT Uplink Module, page 1-28
WS-X4124-RJ45
The WS-X4124-RJ45 24-port Fast Ethernet switching module (see Figure 1-10)
has the following specifications:
Specification Description
Module type 10/100BASE-TX Fast Ethernet switching module
Port duplex mode Half or full duplex mode
Port speed 10 or 100 Mbps

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E