Cisco Catalyst 9200 Series Installation Guide

Data Stack Cabling Configurations 17
Data Stack Bandwidth and Partitioning Examples 18
Power-On Sequence for Switch Stacks 20
Installing the Switch 21
Rack-Mounting 21
Attaching the Rack-Mount Brackets 22
Mounting the Switch a Rack 24
Installing the Switch on a Table or Shelf 24
After Switch Installation 25
Connecting to the StackWise Ports 25
Connecting Devices to the Ethernet Ports 27
10/100/1000 Port Connections 27
Auto-MDIX Connections 27
Auto-MDIX Connections 27
PoE and POE+ Port Connections 28
Installing a Network Module 31
CHAPTER 3
Installing a Network Module in the Switch 31
Safety Warnings 31
Equipment That You Need 31
Installing a Network Module 32
Removing a Network Module 34
Finding the Network Module Serial Number 34
Installing and Removing SFP Modules 35
Installing SFP/SFP+ Modules 35
Removing SFP/SFP+ Modules 37
Installing a Power Supply Unit 39
CHAPTER 4
Power Supply Modules Overview 39
Finding the Power Supply Module Serial Number 41
Installation Guidelines 42
Installing or Replacing an AC Power Supply Module 43
Installing a Fan Module 47
CHAPTER 5
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
iv
Contents

Cisco Catalyst 9200 Series Specifications

General

Category	Switch
Stacking Bandwidth	160 Gbps
Layer	Layer 2 and Layer 3
Operating System	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Series	Cisco Catalyst 9200 Series
Ports	24 or 48 Ethernet ports
Switching Capacity	Up to 176 Gbps
PoE	PoE, PoE+, and UPOE
Stacking	StackWise-160
Memory	4 GB DRAM, 4 GB Flash
Network Management	Cisco DNA Center, WebUI, CLI
Security Features	802.1X, TrustSec, MACsec
Warranty	Limited Lifetime Warranty
Dimensions	1.73 x 17.5 x 11.3 in. (4.4 x 44.5 x 28.8 cm)