Cisco Catalyst 9200 Series Installation Guide

APPENDIX A
Technical Specifications
• Environmental and Physical Specifications, on page 69
• Specifications for the Power Supplies and Fans, on page 72
Environmental and Physical Specifications
This table describes the environmental specifications.
Table 15: Environmental Specifications for the Switch
Environmental Ranges
23 to 113°F (–5 to 45°C)Operating temperature
3
–40 to 158°F (–40 to 70°C)Storage temperature
5 to 90% (noncondensing)Relative humidity
Up to 10,000 ft (3000 m)Operating altitude
Up to 15,000 ft (4500 m)Storage altitude
3
Minimum ambient temperature for cold start is 32°F (0°C)
This table describes the environmental specifications.
Table 16: Environmental Specifications for the Power Supplies
Environmental Ranges
23°F to 113°F (–5°C to 45°C) up to 5000 feet (1500m)
23°F to 104°F (–5°C to 40ºC) up to 10,000 feet
(3000m)
Operating temperature
–40 to 158°F (–40 to 70°C)Storage temperature
10 to 90% (noncondensing)Relative humidity
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
69

Cisco Catalyst 9200 Series Specifications

General

Category	Switch
Stacking Bandwidth	160 Gbps
Layer	Layer 2 and Layer 3
Operating System	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Series	Cisco Catalyst 9200 Series
Ports	24 or 48 Ethernet ports
Switching Capacity	Up to 176 Gbps
PoE	PoE, PoE+, and UPOE
Stacking	StackWise-160
Memory	4 GB DRAM, 4 GB Flash
Network Management	Cisco DNA Center, WebUI, CLI
Security Features	802.1X, TrustSec, MACsec
Warranty	Limited Lifetime Warranty
Dimensions	1.73 x 17.5 x 11.3 in. (4.4 x 44.5 x 28.8 cm)