Cisco Catalyst 9200 Series

Specifications for the Power Supplies and Fans
Table 20: Power Specifications for the AC Power Supplies
Power Requirements
• PWR-C5-1KWAC: 1000 W
• PWR-C5-600WAC: 600 W
• PWR-C5-125WAC: 125 W
Maximum output power
100 to 240 VAC(autoranging) 50-60 HzInput voltage and Frequency
• PWR-C5-1KWAC: 12-6A
• PWR-C5-600WAC: 7-2.8A
• PWR-C5-125WAC: 1.6-0.7A
Input current
• PWR-C5-1KWAC: 54V @ 18.5A
• PWR-C5-600WAC: 54V @ 11.1A
• PWR-C5-125WAC: 12V @ 10.5A
Output ratings
• PWR-C5-1KWAC: 3412 BTUs per hour, 1000W
• PWR-C5-600WAC: 2047.3 BTUs per hour,
600W
• PWR-C5-125WAC: 426.5 BTUs per hour, 125W
Total output BTU
Table 21: Fan Module Environmental and Physical Specifications
Environmental Ranges
23 to 176°F (–5 to 80°C)
Operating temperature
–40 to 185°F (–40 to 85°C) up to 15,000 ft (4500 m)Storage temperature
5 to 95% (noncondensing)Relative humidity
Up to 13,000 ft (4000 m)Altitude
Physical Specification
1.62 x 1.73 x 4.24 in. (4.11 x 4.39 x 10.76 cm)
Dimensions (H x D x W)
0.48 lb (0.21 kg)Weight (for three fans)
Operating Specification
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
72
Technical Specifications
Specifications for the Power Supplies and Fans