Name: Cisco Catalyst 9200 Series
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

It may take up to three mins. You must complete the Day0 setup through the WebUI before using the device

terminal.

Step 4 Launch a Web browser on the PC and enter the device IP address (https://192.168.1.1) in the address

bar.

What to do next

Create a user account.

Creating User Accounts

Setting a username and password is the first task you will perform on your device. Typically, as a network

administrator, you will want to control access to your device and prevent unauthorized users from seeing your

network configuration or manipulating your settings.

Procedure

Step 1 Log on using the default username and password provided with the device.

The default username is cisco; the default password is the serial number of the switch chassis. For Cisco

Catalyst switches running software versions earlier than Cisco IOS XE Fuji 16.9.x, the default username is

webui; the default password is the serial number of the switch chassis.

Step 2 Set a password of up to 25 alphanumeric characters. The username password combination you set gives you

privilege 15 access. The string cannot start with a number, is case sensitive, and allows spaces but ignores

leading spaces.

Figure 34: Create Account

Cisco Catalyst 9200 Series Switches Hardware Installation Guide

Configuring the Switch

Creating User Accounts

Other manuals for Cisco Catalyst 9200 Series

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 9200 Series and is the answer not in the manual?

General