Cisco Catalyst CW9800H1 - Supported SFP Models

DescriptionPID
Two 40 GE-ports that support QSFP optical transceivers to provide
network connectivity.
The supported ports are:
• Fo0/1/0—40-GE QSFP Port 0
• Fo0/1/1—40-GE QSFP Port 1
EPA-2X40GE
(Applies to Cisco Catalyst
CW9800H2 Wireless Controllers
only)
Supported SFP Models
The following table lists the supported SFP and QSFP models [25GBASE and 40GBASE] on the Cisco
Catalyst CW9800H1 and CW9800H2 Wireless Controllers.
Table 7: Supported 25GBASE SFP Models on Cisco Catalyst CW9800H1 Wireless Controller
DescriptionPID
25GBASE-SR SFP28 Module for MMFSFP-25G-SR-S
25GBASE-ER, SFP28 Industrial Temperature Module
for SMF
SFP-25G-ER-I
10/25GBASE-LR Module for SMFSFP-10/25G-LR-I
10/25GBASE-LR SFP28 Module for SMFSFP-10/25G-LR-S
10/25GBASE-CSR SFP28 Module for MMFSFP-10/25G-CSR-S
10GBASE-LR, 10GBASE-BR10, 25GBASE-BR10
SFP28, Bidirectional, Industrial Temperature Module
for SMF
SFP-10/25G-BXD-I
10GBASE-LR, 10GBASE-BR10, 25GBASE-BR10
SFP28, Bidirectional, Industrial Temp Module for
SMF
SFP-10/25G-BXU-I
25GBASE-CR1 Copper Cable 1-meterSFP-H25G-CU1M
25GBASE-CR1 Copper Cable 5-meterSFP-H25G-CU5M
25GBASE-AOC Active Optical Cable 1-meterSFP-25G-AOC1M
25GBASE-AOC Active Optical Cable 2-meterSFP-25G-AOC2M
25GBASE-AOC Active Optical Cable 3-meterSFP-25G-AOC3M
25GBASE-AOC Active Optical Cable 5-meterSFP-25G-AOC5M
25GBASE-AOC Active Optical Cable 7-meterSFP-25G-AOC7M
Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers Hardware Installation Guide
20
Supported Hardware Components
Supported SFP Models