Cisco Catalyst CW9800H1 - Supported Transceivers

DescriptionSFP Model
40GBASE-AOC QSFP direct-attach Active Optical
Cable, 7-meter
QSFP-H40G-AOC7M
40GBASE-AOC QSFP direct-attach Active Optical
Cable, 10-meter
QSFP-H40G-AOC10M
40GBASE-AOC QSFP direct-attach Active Optical
Cable, 15-meter
QSFP-H40G-AOC15M
40GBASE-AOC QSFP direct-attach Active Optical
Cable, 20-meter
QSFP-H40G-AOC20M
40GBASE-AOC QSFP direct-attach Active Optical
Cable, 25-meter
QSFP-H40G-AOC25M
40GBASE-AOC QSFP direct-attach Active Optical
Cable, 30-meter
QSFP-H40G-AOC30M
40GBASE-CR4 QSFP direct-attach copper cable,
7-meter, active
QSFP-H40G-ACU7M
40GBASE-CR4 QSFP direct-attach copper cable,
10-meter, active
QSFP-H40G-ACU10M
Supported Transceivers
The Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers support the following small form-factor
pluggable (SFP) transceiver types:
Cisco Catalyst CW9800H1 and CW9800H2
Wireless Controllers
PortsBay
SFP+Ports TE0 – TE7 use 1 GE or 10 GE SFP+
• Te0/0/0—1-GE SFP/ 10-GE SFP+ Port 0
• Te0/0/1—1-GE SFP/ 10-GE SFP+ Port 1
• Te0/0/2—1-GE SFP/ 10-GE SFP+ Port 2
• Te0/0/3—1-GE SFP/ 10-GE SFP+ Port 3
• Te0/0/4—1-GE SFP/ 10-GE SFP+ Port 4
• Te0/0/5—1-GE SFP/ 10-GE SFP+ Port 5
• Te0/0/6—1-GE SFP/ 10-GE SFP+ Port 6
• Te0/0/7—1-GE SFP/ 10-GE SFP+ Port 7
Bay 0
Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers Hardware Installation Guide
22
Supported Hardware Components
Supported Transceivers