Cisco Catalyst CW9800H1 - Power Supplies

DescriptionPID
10-GBASE-LR SFP+ Module for SMFSFP-10G-LR
10-GBASE-LR SFP+ Module for Extended Temp
range
SFP-10G-LR-X
10-GBASE-ER SFP+ Module for SMFSFP-10G-ER
10-BG-ZR-I SFP+ Module for industrial operating
temperature
SFP-10G-ZR-I
10-GBASE-T Module with SFP+ form factor and an
RJ-45 interface
SFP-10G-T-X
10-GBASE SFP+ model for AOC1MSFP-10G-AOC1M
10-GBASE SFP+ model for AOC2MSFP-10G-AOC2M
10-GBASE SFP+ model for AOC3MSFP-10G-AOC3M
10-GBASE SFP+ model for AOC5MSFP-10G-AOC5M
10-GBASE SFP+ model for AOC7MSFP-10G-AOC7M
10-GBASE-CU SFP+ Cable 7 Meter, activeSFP-H10GB-ACU7M
10-GBASE-CU SFP+ Cable 10 Meter, activeSFP-H10GB-ACU10M
10-GBASE SFP+ model for CU1MSFP-H10GB-CU1M
10-GBASE SFP+ model for CU2MSFP-H10GB-CU2M
10-GBASE SFP+ model for CU3MSFP-H10GB-CU3M
10-GBASE SFP+ model for CU5MSFP-H10GB-CU5M
10-GBASE SFP+ model for CU1-5MSFP-H10GB-CU1-5M
10-GBASE SFP+ model for CU2-5MSFP-H10GB-CU12-5M
10-GBASE- LR-SFP+ Module for MMFFinisar-LR (FTLX1471D3BCL)
10-GBASE-SR SFP+ Module for MMFFinisar-SR (FTLX8574D3BC)
Power Supplies
The Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers support two AC or DC power supply
options. The modular chassis configurations support the installation of two power supplies for redundancy.
When a power supply fails or is removed, the other power supply provides power requirements for the chassis.
This allows you to hot-swap the power supply without impacting the functionality of the controller.
Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers Hardware Installation Guide
24
Supported Hardware Components
Power Supplies