Te0/0/4—1-GE SFP/ 10-GE SFP+ Port 415
Te0/0/6—1-GE SFP/ 10-GE SFP+ Port 616
Carrier Label Tray17
Te0/0/7—1-GE SFP/ 10-GE SFP+ Port 718
Te0/0/5—1-GE SFP/ 10-GE SFP+ Port 519
Te0/0/3—1-GE SFP/ 10-GE SFP+ Port 320
Te0/0/1—1-GE SFP/ 10-GE SFP+ Port 121
RP— RJ-45 1 GE redundancy port22
CON— Mini USB console port23
Never install an AC power module and a DC power module in the same chassis.
Statement 1050
Warning
For the Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers, the power supplies (PEM 0 and
PEM1), are located in the rear side of the chassis. See the Rear View section.
Note
Built-In SFP and SFP+ Ports
The following figures show the port numbering for the built-in ports.
Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers Hardware Installation Guide
5
Overview
Built-In SFP and SFP+ Ports
To Next Page
Loading...
