Cisco Catalyst CW9800H1 - Page 33

Cisco Catalyst CW9800H1 and CW9800H2
Wireless Controllers
PortsBay
• SFP
• QSFP
Cisco Catalyst CW9800H1 Wireless Controller
• TwentyFiveGigE0/2/0 - 25-GE SFP+ Port
0
TwentyFiveGigE0/1/0 - 25-GE SFP+ Port
0
• TwentyFiveGigE0/1/1 - 25-GE SFP+ Port
1
• TwentyFiveGigE0/1/2 - 25-GE SFP+ Port
2
Cisco Catalyst CW9800H2 Wireless Controller
• Fo0/1/0 - 40-GE QSFP Port 0
• Fo0/1/1 - 40-GE QSFP Port 1
Bay 1 and Bay
2
Table 9: Supported SFP Transceiver on Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers (1 GB)
DescriptionPID
1000BASE-LX/LH SFP transceiver module,
MMF/SMF, 1310nm, DOM
GLC-LH-SMD
1000BASE-SX SFP transceiver module, MMF,
850nm, DOM
GLC-SX-MMD
1000BASE-T SFP transceiver module for category 5
copper wire
GLC-TE
1000BASE-ZX SFP transceiver module, SMF,
1550nm, DOM
GLC-ZX-SMD
1000BASE-BX SFP, 1310nmGLC-BX-U
1000BASE-BX SFP, 1490nmGLC-BX-D
1000BASE-EX SFP, long-wavelength, DOMGLC-EX-SMD
Table 10: Supported SFP+ Transceiver on Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers (10 GB)
DescriptionPID
10-GBASE-SR SFP+ Module for MMFSFP-10G-SR
10-GBASE-SR-S SFP+ Module for MMFSFP-10G-SR-S
10-GBASE-SR-I SFP+ Module for MMFSFP-10G-SR-I
Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers Hardware Installation Guide
23
Supported Hardware Components
Supported Transceivers