This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit.
Statement 1028
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing.
Statement 1034
Warning
Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do
not view directly with optical instruments. Viewing the laser output with certain optical instruments
(for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye
hazard.
Statement 1056
Beam Divergence (rad)Max. Power (mW)Wavelength (nm)Fiber type and Core
diameter (μm)
0.1-0.1139-501200-1400SM 11
0.18 NA1501200-1400MM 62.5
0.17 NA1351200-1400MM 50
0.11-0.13112-1451200-1600SM 11
Warning
Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers Hardware Installation Guide
32
Preparing Your Site for Installation
General Safety Warnings
To Next Page
Loading...
