Cisco cBR Series - Page 39

DSG Example with Regionalization Per Downstream
In this configuration, and given the two Cisco CMTS Headends cited earlier in this topic, below are two
downstream rules that can be configured in this architecture, for example:
•
Downstream Rule #1
◦
DSG Rule ID #1
◦ DSG Client ID—101.1.1
◦ DSG Tunnel Address—105.5.5
•
Downstream Rule #2
◦
DSG Rule ID #2
◦ DSG Client ID—102.2.2
◦ DSG Tunnel Address—106.6.6
DSG Example with Regionalization Per Upstream
In this configuration, and given the two Cisco CMTS Headends cited earlier in this topic, below are two
upstream rules that can be configured in this architecture, for example:
•
Upstream Rule #1
◦
DSG Rule ID #1
◦ DSG Client ID—101.1.1
◦ DSG UCID Range—0 to 2
◦ DSG Tunnel Address—105.5.5
•
Upstream Rule #2
◦
DSG Rule ID #2
◦ DSG Client ID—102.2.2
◦ DSG UCID Range—3 to 5
◦ DSG Tunnel Address—106.6.6
Example of Two DSG Tunnels with Full Classifiers and MAC DA Substitution
In this configuration, and given the two Cisco CMTS Headends cited above, below are the two sets of DSG
rules, with each set applying to each Cisco CMTS, in respective fashion.
These settings apply to DSG #1:
•
DSG Rule ID 1
•
Downstreams 1 and 2
•
DSG Client ID 101.1.1
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
33
Advanced-Mode DOCSIS Set-Top Gateway 1.2 for the Cisco CMTS Routers
Configuration Examples for Advanced-Mode DSG