•
DSG Tunnel Address 105.5.5
• DSG Classifier ID—10
• IP SA—12.8.8.1
• IP DA—228.9.9.1
• UDP DP—8000
These settings apply to DSG Rule #2:
•
DSG Rule ID 2
•
Downstreams 1 and 2
•
DSG Client ID 102.2.2
•
DSG Tunnel Address 106.6.6
• DSG Classifier ID—20
• IP SA—12.8.8.2
• IP DA—228.9.9.2
• UDP DP—8000
Example of One DSG Tunnel Supporting IP Multicast from Multiple DSG Servers
In this configuration, and given the two Cisco CMTS Headends cited earlier in this topic, below is an example
of one DSG Tunnel with multiple DSG servers supporting IP Multicast:
•
DSG Rule ID 1
•
Downstreams 1 and 2
•
DSG Client ID 101.1.1 and 102.2.2
•
DSG Tunnel Address 105.5.5
• DSG Classifier ID—10
◦ IP SA—12.8.8.1
◦ IP DA—228.9.9.1
◦ UDP DP—8000
• DSG Classifier ID—20
◦ IP SA—12.8.8.2
◦ IP DA—228.9.9.2
◦ UDP DP—8000
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
34
Advanced-Mode DOCSIS Set-Top Gateway 1.2 for the Cisco CMTS Routers
Configuration Examples for Advanced-Mode DSG
To Next Page
Loading...
