Cisco CDE 220 Series User Manual

4-13
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Chapter 4 Installing the VDS Internet Streamer Software and Initially Configuring a CDE
Launching a New CDE for the First Time
• SNMP must be enabled.
Procedure
Step 1 In the Navigation pane, click the Admin tab.
Step 2 On the Admin tab, click Communications Services.
Step 3 In the Communications Services pane, click the SNMP tab.
Step 4 In the Users area, perform one of the following actions:
• Select an existing user from the table and click Modify.
• Select a row in the Users area and click Add to create a new user.
Step 5 In the SNMP User Details dialog box, update the following properties:
Table 4-4 SNMP User Details that need to be updated
Name Description
ID field The unique identifier for the user. This field
cannot be changed.
Name field The SNMP username.
Enter between 1 and 31 characters or spaces.
Note Cisco IMC automatically trims leading or
trailing spaces.
Security Level drop-down list The security level for this user. This can be one of
the following:
• no auth, no priv—The user does not require
an authorization or privacy password.
• auth, no priv—The user requires an
authorization password but not a privacy
password. If you select this option, Cisco
IMC enables the Auth fields described below.
• auth, priv—The user requires both an
authorization password and a privacy
password. If you select this option, Cisco
IMC enables the Auth and Privacy fields.
Auth Type radio button The authorization type. This can be one of the
following:
• MD5
• SHA
Auth Password field The authorization password for this SNMP user.
Enter between 8 and 64 characters or spaces.
Note Cisco IMC automatically trims leading or
trailing spaces.
Confirm Auth Password field The authorization password again for
confirmation purposes.

Cisco CDE 220 Series Specifications

General

Brand	Cisco
Model	CDE 220 Series
Category	Server
Language	English