4-14
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Chapter 4 Installing the VDS Internet Streamer Software and Initially Configuring a CDE
Re manufacturing a CDE
Step 6 Click Save Changes.
Step 7 If you want to delete a user, select the user and click Delete.
Click OK in the delete confirmation prompt.
Re manufacturing a CDE
If your CDE205, CDE220, CDE280 or CDE250 has failed and is no longer booting up or functioning
properly, you must perform a full remanufacturing of the CDE.
Before You Begin
You need the following to re manufacture a CDE:
• Either a CDE205, CDE220, CDE250, or CDE280:
–
CDE205 chassis with 3 500-GB SATA drives (labeled 0 to 3), and 9 empty chassis drive bay
expanders (not labeled).
–
CDE220 chassis (drives vary by CDE model, see Table 1-5 on page 1-17 for a list of models and
drives).
–
CDE250 chassis (drives vary by CDE model, see Table 1-6 on page 1-19 for a list of models and
drives).
–
CDE280 chassis (drives vary by CDE model, see Table 1-7 on page 1-21 for a list of models and
drives).
• External USB DVD-ROM drive or CD-ROM drive
• Internal IDE CompactFlash (CF) drive (preinstalled)
Note The CDE280 Engine does not require the CF drive.
Privacy Type radio button The privacy type. This can be one of the
following:
• DES
• AES
Privacy Password field The privacy password for this SNMP user.
Enter between 8 and 64 characters or spaces.
Note Cisco IMC automatically trims leading or
trailing spaces.
Confirm Privacy Password field The authorization password again for
confirmation purposes.
Table 4-4 SNMP User Details that need to be updated
Name Description
To Next Page
Loading...
Need help?
General
