E-10
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Appendix E Configuring VDS-IS CDE280 Disks
Changing Drive Status Using CIMC Console
Figure E-12 Status changed in Physical Drive Info
Step 5 Repeat the step 3 for all the Individual JBOD Disks till the status of all the disks are changed to
Unconfigured Good.
Figure E-13 Status of all Disks in Physical Drive Info
Step 6
Click the Controller Info tab and click the Create Virtual Drive from Unused Physical Drives radio
button.
To Next Page
Loading...
