E-12
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Appendix E Configuring VDS-IS CDE280 Disks
Changing Drive Status Using CIMC Console
Figure E-16 Creating Virtual Drive from Unused Physical Drives
Step 9
To verify the status of the disks for which the Device Group is created, choose Storage > Cisco 12G
SAS Modular Raid Controller (SLOT-HBA) > Physical Drive Info.
You can view the Physical Drive status is changed as Online.
Figure E-17 Verifying the Status of the Disks
To Next Page
Loading...
