F-2
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Appendix F VDS-IS and VQE CDE280 and CDE285 CIMC / BIOS Firmware
VDS-IS and VQE CDE 280 CIMC Firmware and BIOS Firmware Upgrade
Note You must ensure that you have already downloaded a ISO image before upgrading.
h. In the Virtual Media popup window, click Browse, and select the required ISO image.
i. Click Open.
Note If user upgrade the UCS CIMC and BIOS to 3.0 Version and try for VDSIS ISO to rescue or
manufacturing the CDE 280 device which will fail with import/export utility. To avoid this failure, the
user needs to run and enable Power Characterization in the UCS.
To Next Page
Loading...
