28
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40 Administrator guide
D14636.06 Profile C60-C40 and Codec C60-C40 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
The audit certificate list
If you want to use the ExternalSecure audit logging mode,
you must upload a list of trusted audit certificates to the video
conference system. This list covers all audit servers that your
system shall trust.
In the ExternalSecure audit logging mode audit logging
information will only be sent to entities holding a valid audit
certificate.
NOTE: You should always upload the audit certificate list
before enabling secure audit logging.
About audit logging
Audit logging records all login activity and configuration
changes on the system.
Audit logging is disabled by default. You can enable audit
logging using the on-screen menu or the web interface.
1. Upload the audit certificate list
To install the audit certificate, you will need:
• Audit list file ( .PEM format)
Contact your system administrator to obtain the required file.
i. Press Browse... and locate the file with the audit list file
(.PEM format).
ii. Press Upload to upload the certificate to your system.
2. Enable secure audit logging
When you have uploaded the audit certificate list you must
enable secure audit logging:
i. Navigate to Advanced Configuration > Security > Audit >
Server and enter the IP address and Port number of the
audit server.
ii. Navigate to Advanced Configuration > Security > Audit >
Logging > Mode and set it to ExternalSecure.
Maintenance
Upgrade Software
Certificate Management
Audit Certificate
User Administration
Change Password
Restart
To Next Page
Loading...
