64
Cisco TelePresence System Codec C60/C40 and Profiles using C60/C40 Administrator guide
D14636.06 Profile C60-C40 and Codec C60-C40 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Time TimeFormat
Set the time format.
Requires user role: USER
Value space: <24H/12H>
24H: Set the time format to 24 hours.
12H: Set the time format to 12 hours (AM/PM).
Example: Time TimeFormat: 24H
Time DateFormat
Set the date format.
Requires user role: USER
Value space: <DD_MM_YY/MM_DD_YY/YY_MM_DD>
DD_MM_YY: The date January 30th 2010 will be displayed: 30.01.10
MM_DD_YY: The date January 30th 2010 will be displayed: 01.30.10
YY_MM_DD: The date January 30th 2010 will be displayed: 10.01.30
Example: Time DateFormat: DD_MM_YY
The Video settings
Video Input Source [1..3] Name
Enter a name for the video input source.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: Video Input Source 1 Name: ""
Video Input Source [1] Connector
Select which video input connector to be active on video input source 1.
Requires user role: ADMIN
Value space: <HDMI>
HDMI: Select HDMI when you want to use the HDMI 1 as input source 1.
Example: Video Input Source 1 Connector: HDMI
Video Input Source [2] Connector
NOTE: Codec C40 has one DVI input (DVI-I 3). Codec C60 has two DVI inputs (DVI-I 2 and 3).
Select which video input connector to be active on video input source 2.
Requires user role: ADMIN
Value space: <HDMI/DVI>
HDMI: Select HDMI when you want to use the HDMI 2 as input source 2.
DVI: Select DVI-I when you want to use the DVI-I 2 as input source 2.
Example: Video Input Source 2 Connector: HDMI
Video Input Source [3] Connector
NOTE: Codec C40 has one DVI input (DVI-I 3). Codec C60 has two DVI inputs (DVI-I 2 and 3).
Select which video input connector to be active on video input source 3.
Requires user role: ADMIN
Value space: <DVI/Composite/YC>
DVI: Select DVI-I when you want to use the DVI-I 3 as input source 3.
Composite: Select Composite when you want to use the Composite as input source 3.
YC: Select YC when you want to use the S-Video (YC) as input source 3. Connect to the two
connectors marked Y/Comp and C.
Example: Video Input Source 3 Connector: DVI
To Next Page
Loading...
