1-53
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
OL-21483-02
Chapter 1 General Troubleshooting
ASIC Errors
2141 drwx 4096 Fri Oct 14 13:52:22 2005 node0_5_CPU0
The output shows that there were two line card reloads caused by ASIC errors (June 16 and October 14).
The following example lists the PSE files for a specific node reload. The PSE files contain the actual
ASIC error data that triggered the reload.
RP/0/RP0/CPU0:router# dir harddisk:/ASIC-ERROR/node0_3_CPU0
Directory of harddisk:/ASIC-ERROR/node0_3_CPU0
123273312 -rwx 4823 Sat Aug 13 20:04:06 2005 pse_00.err
123273376 -rwx 4794 Sat Aug 13 20:04:06 2005 pse_01.err
The following example shows how to display the contents of a specific PSE file.
RP/0/RP0/CPU0:router# more harddisk:/ASIC-ERROR/node0_3_CPU0/pse_00.err
Next file write offset = 4823
^@
################# Start of data pse_00_061605_083214.err #################
************************************************************
* ASIC Errors Summary *
************************************************************
Number of nodes : 2
SBE error count : 0
MBE error count : 0
Parity error count : 0
CRC error count : 0
Generic error count : 0
The following example shows how to display a summary for each ASIC. If an error is displayed, dump
the individual asic instance number to obtain details on the ASIC error.
RP/0/RP0/CPU0:router# show asic-errors all location 0/6/cpu0
************************************************************
* Fia ASIC Error Summary *
************************************************************
Instance : 0
Number of nodes : 130
SBE error count : 0
MBE error count : 0
Parity error count : 0
CRC error count : 0
Generic error count : 0
Reset error count : 0
--------------------
Instance : 1
Number of nodes : 130
SBE error count : 0
MBE error count : 0
Parity error count : 0
CRC error count : 0
Generic error count : 0
Reset error count : 0
--------------------
************************************************************
* Pse ASIC Error Summary *
************************************************************
Instance : 0
Number of nodes : 2
SBE error count : 0