EasyManuals Logo

Cisco Firepower 2100 User Manual

Cisco Firepower 2100
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #205 background imageLoading...
Page #205 background image
!
dhcpd auto_config outside
dhcpd address 192.168.1.20-192.168.1.254 inside
dhcpd enable inside
!
ip-client outside
!
dns domain-lookup outside
dns server-group DefaultDNS
name-server 208.67.222.222 outside
name-server 208.67.220.220 outside
FXOS Configuration
The default factory configuration for FXOS on the Firepower 2100 configures the following:
Management 1/1—IP address 192.168.45.45
Default gateway—ASA data interfaces
Chassis Manager and SSH access—From the management network only.
Default Usernameadmin, with the default password Admin123
DHCP server—Client IP address range 192.168.45.10-192.168.45.12
NTP server—Cisco NTP servers: 0.sourcefire.pool.ntp.org, 1.sourcefire.pool.ntp.org,
2.sourcefire.pool.ntp.org
DNS Servers—OpenDNS: 208.67.222.222, 208.67.220.220
Ethernet 1/1 and Ethernet 1/2—Enabled
Cisco Firepower 2100 Getting Started Guide
203
ASA Deployment with ASDM
Firepower 2100 Platform Mode Default Configuration

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Firepower 2100 and is the answer not in the manual?

Cisco Firepower 2100 Specifications

General IconGeneral
BrandCisco
ModelFirepower 2100
CategoryGateway
LanguageEnglish

Related product manuals