Cisco Firepower 2100 User Manual

Figure 22: NAT Policy
Step 3 Click Add Rule.
The Add NAT Rule dialog box appears.
Step 4 Configure the basic rule options:
Figure 23: Basic Rule Options
• NAT Rule—Choose Auto NAT Rule.
• Type—Choose Dynamic.
Step 5 On the Interface Objects page, add the outside zone from the Available Interface Objects area to the
Destination Interface Objects area.
Cisco Firepower 2100 Getting Started Guide
37
Threat Defense Deployment with the Management Center
Configure NAT

Cisco Firepower 2100 Specifications

General

Brand	Cisco
Model	Firepower 2100
Category	Gateway
Language	English