Cisco Firepower 2100

Figure 35: End-to-End Tasks: Manual Provisioning
• (Optional) Check the Software and Install a New Version, on page 53
• Pre-Configuration Using the Device Manager, on page 55
• Pre-Configuration Using the CLI, on page 60
CLI or Device
Manager
(Central admin)
Install the firewall. See the Cisco Firepower 2100 Series Hardware Installation
Guide.
Physical Setup
(Branch admin)
Cable the Firewall, on page 66.Physical Setup
(Branch admin)
Cisco Firepower 2100 Getting Started Guide
52
Threat Defense Deployment with a Remote Management Center
End-to-End Tasks: Manual Provisioning