Step 6 If you want to configure additional interfaces, including an interface other than outside or inside that you want
to use for the manager access, choose Device, and then click the link in the Interfaces summary.
See Configure the Firewall in the Device Manager, on page 118 for more information about configuring
interfaces in the device manager. Other device manager configuration will not be retained when you register
the device to the management center.
Step 7 Choose Device > System Settings > Central Management, and click Proceed to set up the management
center management.
Step 8 Configure the Management Center/CDO Details.
Cisco Firepower 2100 Getting Started Guide
57
Threat Defense Deployment with a Remote Management Center
Pre-Configuration Using the Device Manager
To Next Page
Loading...
Need help?
General