Cisco Firepower 2100 User Manual

Figure 61: NAT Policy
Step 3 Click Add Rule.
The Add NAT Rule dialog box appears.
Step 4 Configure the basic rule options:
Figure 62: Basic Rule Options
• NAT Rule—Choose Auto NAT Rule.
• Type—Choose Dynamic.
Step 5 On the Interface Objects page, add the outside zone from the Available Interface Objects area to the
Destination Interface Objects area.
Cisco Firepower 2100 Getting Started Guide
85
Threat Defense Deployment with a Remote Management Center
Configure NAT

Cisco Firepower 2100 Specifications

General

Brand	Cisco
Model	Firepower 2100
Category	Gateway
Language	English