Cisco Firepower 4100 Series - Page 21

1.4 dB
1.7 dB
0.9 dB
1.2 dB
Normal
Hardware bypass
Insertion loss
Cable Distance
Half the distance
specified by the
IEEE standard.
Note
Modal Bandwidth
(MHz/km
Core Diameter (microns)
13 m
16.5 m
33 m
41 m
150 m
200 m
160 (FDDI)
200(OM1)
400
500 (OM2)
2000 (OM3)
4700 (OM4)
62.5
62.5
50
50
50
50
Cable and operating
distance
Table 3: 10G LR Network Module (FPR-NM-6X10LR-F)
MaximumTypicalOperating Mode
1.6 dB
1.9 dB
1.2 dB
1.5 dB
Normal
Hardware bypass
Insertion loss
Cable Distance
Half the distance
specified by the
IEEE standard.
Note
Modal Bandwidth
(MHz/km
Core Diameter (microns)
5 mSingle modeG.652Cable and operating
distance
For More Information
•
See Nonhardware (FTW) Bypass Network Modules, on page 10 for the location and description
of the LEDs, and the port configurations for the non-hardware bypass network modules.
•
See Remove and Replace the Network Module, on page 59 for the procedure for removing and
replacing network modules.
Cisco Firepower 4100 Series Hardware Installation Guide
17
Overview
Hardware Bypass (FTW) Network Modules