Cisco Firepower 4100 Series Hardware Installation Guide

Step 8
Tighten the M5 screw with the captive washer to the recommended torque of 5 in-lbs for the positive stud and wire.
Secure the wires coming in from the terminal block so that they cannot be disturbed by casual contact.
Figure 49: Tighten the M5 Screws
Cisco Firepower 4100 Series Hardware Installation Guide
74
Maintenance and Upgrades
Connect the DC Power Supply Module

Cisco Firepower 4100 Series Specifications

General

Brand	Cisco
Model	Firepower 4100 Series
Category	Firewall
Language	English