Cisco IE 2000 User Manual

72
 Use the CLI to configure the switch as an individual switch from the console. See the Command Reference on
Cisco.com for information about using the CLI.
 Start an SNMP application such as the CiscoView application.
 Start the Common Industrial Protocol (CIP) management tool. You can manage an entire industrial automation system
with the CIP-based tools.

Cisco IE 2000 Specifications

General

Uplink Ports	2 SFP ports
Mounting	DIN rail or wall mount
Management	CLI, Web, SNMP
MAC Address Table Size	8000
Category	Switch