Cisco IP DECT 210 - Unlock the Handset Keypad; Buttons and Hardware

Procedure
Press and hold Asterisk until the message “Press and hold *” and the key lock icon ( or ) are
displayed on the screen.
Related Topics
Set the Handset Lock and PIN, on page 61
Set the Timer to Automatically Lock the Handset, on page 62
Unlock the Handset Keypad
If the keypad is locked, you must unlock it before you can place most calls. You may need to input a PIN to
unlock the handset.
When the keypad is locked, you can only dial emergency numbers.
Note
Procedure
Press and hold Asterisk until the message “Press and hold *” and the key lock icon or
doesn't display on the screen.
Related Topics
Set the Handset Lock and PIN, on page 61
Set the Timer to Automatically Lock the Handset, on page 62
Buttons and Hardware
Your handset has many buttons and hardware features that you will use regularly. Use the following figure
and table to identify the important button and hardware features.
Cisco IP DECT 6800 Series User Guide
3
Your Handset
Unlock the Handset Keypad