Cisco IP DECT 210 - Set the Confirmation Sound; Set the Coverage Warning; Set the Charger Warning

Step 2 Select Settings > Key sound.
Step 3 Highlight your choice.
• Silent (default): When you press a key, you don't hear anything.
• Click: When you press a key, you hear a click.
• Tone: When you press a key, you hear a tone.
Step 4 Press Select to save the setting.
Set the Confirmation Sound
You can set the handset to play a tone when you change a setting on the handset.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Audio Settings.
Step 3 Highlight Confirmation sound.
Step 4 Press Off to stop the tone or press On to make the handset play the tone.
Set the Coverage Warning
You can set the handset to play a tone when you move your handset too far away from the base station.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Audio Settings.
Step 3 Highlight Coverage warning.
Step 4 Press Off to stop the tone or press On to make the handset play the tone.
Set the Charger Warning
You can set the handset to play a tone when you put the handset on the charger.
Cisco IP DECT 6800 Series User Guide
58
Settings
Set the Confirmation Sound