Cisco IP DECT 210 - Time and Date; Set the Time Format; Set the Date Format

Procedure
Step 1 Press Menu .
Step 2 Select Settings > Audio Settings.
Step 3 Highlight Charger warning.
Step 4 Press Off to stop the tone or press On to make the handset play the tone.
Time and Date
Set the Time Format
You can set the way that the time displays on the handset.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Time & date > Time.
Step 3 Press Format.
Step 4 Highlight your choice.
• 24 hour (default): Display the time in 24-hour format.
• am/pm: Display the time in 12-hour format.
Step 5 Press Select to save the setting.
Set the Date Format
You can set the way the date displays on the handset.
In this procedure, the date August 24, 2018 is used for the choices. The choices display in the date on your
handset.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Time & date > Date.
Step 3 Press Format.
Cisco IP DECT 6800 Series User Guide
59
Settings
Time and Date