Cisco IP DECT 210 - CHAPTER 4 Text Messages; Send a Text Message

CHAPTER 4
Text Messages
• Text Messages, on page 35
• Send a Text Message, on page 35
• Reply to a Text Message Immediately, on page 36
• Add a Text Message Sender to Your Local Contacts, on page 37
• Append a Text Message Sender to a Local Contact, on page 37
• Forward a Text Message, on page 38
• Delete a Text Message Immediately, on page 38
• Delete all Text Messages, on page 39
• View Your Text Message History, on page 39
• Configure Your Text Message Settings, on page 41
Text Messages
Your administrator may enable you to send and receive text messages from coworkers on the system. You
may also be able to send text messages to people outside the system. Your administrator should tell you the
text message constraints.
You can view the history of your text messages and you can set some messaging parameters to suit your needs.
Send a Text Message
You can send a message of up to 160 characters.
Procedure
Step 1 Press Menu .
Step 2 Select Messaging > Drafts.
Step 3 Press New.
Step 4 Use the keypad to type your message. The length of your message displays on the bottom right corner of the
screen.
Cisco IP DECT 6800 Series User Guide
35