Cisco IP DECT 210 - Set the Ringtone for Different Call Types

Procedure
Step 1 Press Menu .
Step 2 Select Settings > Ring volume.
Step 3 Press right or left on the ring of the navigation cluster .
Step 4 Press Ok to save the level.
Set the Ringtone For Different Call Types
You can set different ring tones for these types of calls:
• Normal call
• Normal message
• Urgent message
• Emergency
• Alert
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Audio settings.
Step 3 Select the ringtone you want to change.
• Ring melody
• Ring normal ms.
• Ring urgent ms.
• Ring emergency
• Alert tone
Step 4 Press up or down on the ring of the navigation cluster to highlight a tone.
Step 5 Press Play to hear the tone.
Step 6 Press Select to save the tone.
Cisco IP DECT 6800 Series User Guide
56
Settings
Set the Ringtone For Different Call Types