Cisco IP DECT 210 - Answer a Call; Make a Speed Dial Call

Example
To set up a speed-dial number to call a person at a specific extension, and if you need an authorization code
and billing code, consider the following requirements:
• You need to dial 9 for an outside line.
• You want to call 5556543.
• You need to input the authorization code 1234.
• You need to input the billing code 9876.
• You must wait for 4 seconds.
• After the call connects, you must dial the extension 56789#.
In this scenario, the speed-dial number is 95556543,1234,9876,,56789#.
Make a Speed Dial Call
After you set up the speed dial, as described in Assign a Speed Dial Number, on page 26, you can make a
speed dial call. Speed dial indexes are the numbers 2 to 9.
Example
If you have your home number in your local contacts, you can assign it the speed dial index 9. Then when
you press and hold the 9 key, the handset automatically dials your home.
Before you begin
You need the speed dial index for the contact.
Procedure
Step 1 Press and hold the number on the keypad corresponding to the speed dial index.
Step 2 Release the key when the call starts to dial.
Answer a Call
If you have multiple lines, your handset displays the line that has the incoming call.
If you have a Bluetooth headset paired to the handset, the call is answered on the headset. If you don't have
a Bluteooth headset paired, the call is answered on the handset.
Procedure
Press Answer/Send .
Cisco IP DECT 6800 Series User Guide
28
Calls
Make a Speed Dial Call