Cisco IP DECT 210 - Make a Call with the Speakerphone; Make a Call with a Headset; Speed Dial Calls; Assign a Speed Dial Number

Procedure
Step 1 When your handset is idle, enter the phone number with the keypad. To start the number with plus (+), press
and hold Asterisk until the + displays on the screen.
Step 2 Press Line.
Step 3 Highlight the line and press Select.
Make a Call with the Speakerphone
Procedure
Step 1 When your handset is idle, enter the phone number with the keypad. To start the number with plus (+), press
and hold Asterisk until the + displays on the screen.
Step 2 Press Speakerphone .
Make a Call with a Headset
Procedure
Step 1 When your handset is idle, remove the cover from the headset port and plug in your headset.
Step 2 Enter the phone number with the keypad. To start the number with plus (+), press and hold Asterisk
until the + displays on the screen.
Step 3 Press Answer/Send .
Speed Dial Calls
If you make frequent calls to specific phone numbers, you can set up your handset for speed dials. You can
set up to 8 speed dial numbers.
Assign a Speed Dial Number
You can assign a speed dial number to a contact. You assign speed dials to entries 2 to 9. Entry 1 is used for
your speed dial to voicemail.
Cisco IP DECT 6800 Series User Guide
26
Calls
Make a Call with the Speakerphone